Toyota Tundra 2005 Service - Repair - Maintenance page 2849

RS-82
SUPPLEMENTAL RESTRAINT SYSTEM
Claw
- SIDE AIRBAG ASSEMBLY (Passenger Side of Split
Type)
(o) Install the seatback cover belt to the hook.
(p) Install the hog rings to the seatback cover belt.
2. INSTALL SEAT CUSHION LOWER SHIELD
Install the seat cushion lower shield with the 2 screws.
H24354
3. INSTALL RH SEAT CUSHION SHIELD
Engage the claws and install the RH seat cushion shield.
4. INSTALL RECLINING ADJUSTER RELEASE HANDLE
5. INSTALL HEADRESTS
6. INSTALL SEAT LEG INNER COVER
Install the seat leg inner cover with the 3 screws.
7. INSTALL FRONT SEAT
(a) Mount the front seat to the vehicle.
NOTICE:
H24352
Be careful not to damage the body.
(b) w/ Side airbag:
Connect the airbag connector.
(c) Connect the connectors.
(d) Slide the front seat to the rearmost position .
(e) Tighten the bolts on the front side temporarily, starting
from the bolt on the inner side tighten them completely.
Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)
(f) Slide the front seat to the most front position.
(g) Tighten the bolts on the rear side temporarily, starting
from the bolt on the inner side tighten them completely.
Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)
8. INSTALL SEAT TRACK COVERS
9. CONNECT CABLE TO NEGATIVE BATTERY TERMI-
NAL
10. INSPECT SRS WARNING LIGHT (SEE PAGE
Author : Date :
DI-1859 )
4497