Toyota Tundra 2005 Service - Repair - Maintenance page 3307

BODY - FRONT SEAT (Split Type: Passenger's Side)
16. REMOVE OUTER SEAT TRACK
HINT:
Slide the outer seat track until the torx® screws on the front and
rear sides can be seen.
Remove the 4 torx® screws and outer seat track.
17. REMOVE INNER SEAT TRACK
Perform the same procedure on the inner seat track.
H24366
18. REMOVE SEAT CUSHION FRAME
Remove the hog rings and seat cushion frame from the seat
cushion pad.
H24367
19. REMOVE SEAT CUSHION COVER
Remove the hog rings and seat cushion cover from the seat
cushion pad.
20. REMOVE BELT WARNING OCCUPANT DETECTION
SENSOR
Detach the belt warning occupant detection sensor from the
seat cushion pad.
21. REMOVE FRONT SEAT INNER BELT
(a) Disconnect the wire harness clamps.
H24368
(b) Remove the bolt and front seat inner belt from the seat
cushion frame.
Author : Date :
BO-193
4964