SA−36
SUSPENSION AND AXLE
SST
Z00638
SST
R13369
SST
R13370
SST
R13371
−
FRONT DIFFERENTIAL REAR OIL SEAL
REPLACEMENT
1.
REMOVE ENGINE UNDER COVER
2.
DRAIN DIFFERENTIAL OIL
3.
REMOVE FRONT PROPELLER SHAFT
(See page PR−10)
4.
REMOVE COMPANION FLANGE
(a)
Using a chisel and hammer, loosen the staked part of the
nut.
(b)
Using SST to hold the flange, remove the nut.
SST
09330−00021
(c)
Using SST, remove the companion flange.
SST
09950−30012 (09951−03010, 09953−03010,
09954−03010, 09955−03030, 09956−03020)
5.
REMOVE OIL SEAL AND OIL SLINGER
(a)
Using SST, remove the oil seal.
SST
09308−10010
(b)
Remove the oil slinger.
6.
REMOVE REAR BEARING AND BEARING SPACER
(a)
Using SST, remove the rear bearing from the drive pinion.
SST
09556−22010
(b)
Remove the bearing spacer.
7.
INSTALL BEARING SPACER, REAR BEARING AND
OIL SLINGER
(a)
Install a new bearing spacer and place the rear bearing
and oil slinger.
SA09M−09