Toyota Tundra 2005 Service - Repair - Maintenance page 2825

Hide thumbs Also See for Tundra 2005:

Table of Contents

SUPPLEMENTAL RESTRAINT SYSTEM

10 m (33 ft) or more

SIDE AIRBAG ASSEMBLY (Power Adjuster Type)

Tie the tires together with 2 wire harness.

Make sure that the wire harness is tight. Looseness in the

wire harness results in the tires coming free due to the

shock when the airbag is deployed.

Install the SST.

Connect the connectors of the 2 SST to the side airbag

assembly connector.

To avoid damaging the SST connector and wire harness,

do not lock the secondary lock of the twin lock. Also, se-

cure some slack for the SST wire harness inside the tire.

Deploy the airbag.

Connect the red clip of the SST to the battery posi-

tive (+) terminal and the black clip of the SST to the

battery negative (-) terminal.

Check that no one is within a 10 m (33 ft) radius of

the tire which the front seat airbag assy LH is tied to.

Press the SST activation switch and deploy the air-

When deploying the airbag, make sure that no one is near

The airbag deploys as the LED of the SST activation switch