Toyota Tundra 2005 Service - Repair - Maintenance page 2641

BRAKE − ABS ACTUATOR
REMOVAL
1. REMOVE BRAKE LINE COVER
2. DISCONNECT CONNECTOR
Pull out the release bar, and disconnect the ABS ECU connec-
tor.
3. DISCONNECT BRAKE LINES
Using SST, disconnect the 5 brake lines from the ABS actuator.
SST
Torque: 15.2 N·m (155 kgf·cm, 11.2 ft·lbf)
HINT:
S
When disconnecting the brake line, use tags or make a
memo to identify the place to reconnect
(see page BR−64).
S
At the time of installation, connect each brake line to the
F19545
correct position (see page BR−64).
4. REMOVE ABS ACTUATOR ASSEMBLY
Remove the 3 nuts and ABS actuator assembly.
Torque: 11.2 N·m (114 kgf·cm, 8 ft·lbf)
5. REMOVE ABS ACTUATOR
(a) Remove the 2 nuts and ABS actuator from the actuator
bracket.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
F19546
09023−00101
BR−65
BR10V−02