Toyota Tundra 2005 Service - Repair - Maintenance page 3286

BO-172
BODY - FRONT SEAT (Bench Type)
5. INSTALL SEAT TRACK HANDLE LH
(a) Install the seat track handle LH with the nut.
H24303
(b) Install the spring.
H24302
(c) Connect the seat track control cable.
H24304
6. INSTALL LH OUTER TRACK ASSEMBLY
Slide the LH outer track assembly until the torx® screws
(a)
on the front side can be seen.
(b) Using a torx® socket wrench, install the 2 torx® screws to
the LH outer track assembly front side.
Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)
H24301
Slide the LH outer track assembly until the torx® screws
(c)
on the rear side can be seen.
(d) Using a torx® socket wrench, install the 2 torx® screws to
the LH outer track assembly rear side.
Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)
H24300
Author : Date :
4943