BE-184
Tilt
Up
Up
Down
Down
Forward
Front
FORWARD
RELEASE
(a)
2
1
BODY ELECTRICAL
Lifter
Reclining
Rear
Back
I11912
4
3
2
1
I20957
(b)
2
1
I07253
-
POWER SEAT CONTROL SYSTEM
INSPECTION
1.
INSPECT POWER SEAT SWITCH CONTINUITY
Slide switch:
Switch Position
FRONT
OFF
BACK
Front tilt switch:
Switch Position
UP
OFF
DOWN
Rear lifter switch:
Switch Position
UP
OFF
DOWN
Reclining switch:
Switch Position
FORWARD
OFF
REAR
If the continuity is not as specified, replace the switch.
2.
INSPECT LUMBAR SUPPORT SWITCH CONTINUITY
Switch Position
FORWARD
OFF
RELEASE
If the continuity is not as specified, replace the switch.
3.
INSPECT SLIDE MOTOR OPERATION
(a)
Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2. Check that the
motor turns clockwise.
(b)
Reverse the polarity, and check that the motor turns coun-
terclockwise.
If operation is not as specified, replace the seat adjuster.
Author :
Tester Connection
Specified Condition
1 - 9, 4 - 6
4 - 6 - 9
1 - 6, 4 - 9
Tester Connection
Specified Condition
1 - 10, 4 - 5
4 - 5 - 10
1 - 5, 4 - 10
Tester Connection
Specified Condition
1 - 7, 4 - 8
4 - 7 - 8
1 - 8, 4 - 7
Tester Connection
Specified Condition
1 - 3, 2 - 4
2 - 3 - 4
1 - 2, 3 - 4
Tester Connection
Specified Condition
1 - 4, 2 - 3
1 - 2 - 3
1 - 3, 2 - 4
Date :
BE2KP-01
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
Continuity
4741