Toyota Tundra 2005 Service - Repair - Maintenance page 2821

Hide thumbs Also See for Tundra 2005:

Table of Contents

SUPPLEMENTAL RESTRAINT SYSTEM

10 m (33 ft) or more

AIRBAG DEPLOYMENT WHEN SCRAPPING VE-

Check the function of the SST (see step 1-(a) on page

Precaution (see page

Disconnect the battery negative terminal.

Wait for 90 seconds after disconnecting the cable to prevent the

airbag working.

Remove the 4 bolts from the front seat assy (see page

Keep the front seat assy LH in the cabin.

Disconnect the connector (yellow colored one) from the

front seat airbag assy LH.

When handling the airbag connector, take care not to dam-

age the airbag wire harness.

Install the SST.

To avoid damaging the SST connector and wire harness,

do not lock the secondary lock of the twin lock.

Take care not to damage the SST wire harness.

SIDE AIRBAG ASSEMBLY (Power Adjuster Type)

(power adjuster type),

(passenger side of split type)).

Connect the connectors of the SST to the airbag

09082-00700, 09082-00750

Move the SST at least 10 m (33 ft) away from the ve-

hicle side window.

Maintaining enough clearance for the SST wire har-

ness in the front side window, close all doors and

windows of the vehicle.

Connect the red clip of the SST to the battery posi-

tive (+) terminal and the black clip to the battery neg-

ative (-) terminal.

(manual sdjuster