Toyota Tundra 2005 Service - Repair - Maintenance page 3313

Torx® Screw
H24359
H24358
H24357
BODY - FRONT SEAT (Split Type: Passenger's Side)
(c) Install the 3 bolts.
Torque:
Bolt A: 55 N·m (561 kgf·cm, 41 ft·lbf)
Bolt B: 21 N·m (214 kgf·cm, 15 ft·lbf)
Bolt A
Bolt B
(d) Connect the front seat center belt with the 3 nuts.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
(e) Install the RH reclining adjuster inside cover with the 2
screws.
(f) Install the RH seat cushion lower shield with the screw.
(g) Connect the front seat center belt with the bolt to the seat
cushion assembly.
Torque: 42 N·m (430 kgf·cm, 32 ft·lbf)
(h) Install the hog rings to the seat cushion cover.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
Author :
BO-199
H24360
Date :
4970