Toyota Tundra 2005 Service - Repair - Maintenance page 3125
Hide thumbs
Also See for Tundra 2005:
- Pocket reference manual (17 pages) ,
- Owner's manual (703 pages) ,
- Owner's manual (498 pages)
Table of Contents
Advertisement
: Clip
BODY
-
FRONT DOOR
DISASSEMBLY
HINT:
A bolt without a torque specification is shown in the standard
bolt chart (see page
1.
w/o Power window:
REMOVE REGULATOR HANDLE
Pull off the snap ring with a cloth and remove the regulator han-
dle and plate.
BO0020
2.
REMOVE INSIDE HANDLE BEZEL
(a)
Remove the screw.
(b)
Using a screwdriver, remove the inside handle bezel as
shown in the illustration.
HINT:
Tape the screwdriver tip before use.
H09440
3.
w/ Power window:
REMOVE POWER WINDOW SWITCH
(a)
Using a screwdriver, remove the power window switch.
HINT:
Tape the screwdriver tip before use.
(b)
Disconnect the connectors.
4.
w/ Courtesy light:
REMOVE COURTESY LIGHT
(a)
Using a screwdriver, remove the courtesy light.
H09441
HINT:
Tape the screwdriver tip before use.
(b)
Disconnect the connector.
5.
w/o Courtesy light:
REMOVE COURTESY LIGHT COVER
Using a screwdriver, remove the courtesy light cover.
HINT:
Tape the screwdriver tip before use.
6.
w/ Tweeter speaker:
REMOVE TWEETER SPEAKER
(a)
Using a screwdriver, remove the tweeter speaker cover.
HINT:
Tape the screwdriver tip before use.
(b)
Disconnect the connector.
(c)
Remove the 3 screws and tweeter speaker.
SS-2
).
Author :
Date :
BO-1 1
BO0I3-05
4782
Advertisement
Table of Contents
