Toyota Tundra 2005 Service - Repair - Maintenance page 3054

BE-154
REGISTRATION PROCEDURE
REGISTER RECOGNITION CODE
HINT:
_
Register the recognition code when replacing the door control transmitter or the door control receiver.
_
The add mode is used to register new recognition codes while still retaining codes already registered.
This mode is used when a new transmitter is added. If the number of registered codes exceeds 4, the
previously registered codes will be erased in order, starting from the first registered code.
_
The rewrite mode is used to erase all the previously registered recognition codes in order to register
new recognition codes. This mode is used when the transmitter or the door control receiver is replaced
a new one.
_
The confirmation mode is used to confirm how many recognition codes have already been registered
before an additional registration of a recognition codes.
_
The prohibition mode is used to erase all the registered codes and disables the wireless door lock func-
tion. This mode is used when the transmitter is lost.
_
All the following registration procedures must be performed in order continuously.
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM (Double
Cab)
Author : Date :
BE2LN-01
4711