Toyota Tundra 2005 Service - Repair - Maintenance page 3249

4 Claws
Clip
Clip
Clip
Clip A
BODY
(d) Remove the 2 screws and assist grip.
(e) Use the same manner described above to the other side.
17. w/o Curtain shield airbag assembly:
REMOVE ASSIST GRIP
(a) Using a screwdriver, remove the No. 2 assist grip piug.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 2 screws and assist grip.
(c) Use the same manner described above to the other side.
H16720
18. REMOVE CENTER PILLAR GARNISH UPPER LH
(a) Using a clip remover, remove the clip labeled A, clip la-
beled B and garnish.
19. REMOVE CENTER PILLAR GARNISH UPPER RH
HINT:
Use the same procedures described for the RH side.
H16721
20. REMOVE CENTER PILLAR GARNISH LOWER LH
Using a screwdriver, remove the 4 clips and garnish.
Clip
HINT:
Tape the screwdriver tip before use.
21. REMOVE CENTER PILLAR GARNISH LOWER RH
HINT:
Use the same procedures described for the RH side.
H23516
22. REMOVE QUARTER TRIM PANEL LOWER LH
(a) Remove the rear floor anchor belt cover and bolt.
(b) Using a screwdriver, remove the clip labeled A, 3 clips la-
beled B and pillar garnish.
Clip B
HINT:
Tape the screwdriver tip before use.
23. REMOVE QUARTER TRIM PANEL LOWER RH
HINT:
Use the same procedures described for the RH side.
H23514
- ROOF HEADLINING (Double Cab)
Author :
BO-135
Date :
4906