Toyota Tundra 2005 Service - Repair - Maintenance page 2420

SA−6
Example
= Standard value point
= Measured value point
Camber
Caster
Front Cam
Direction
(Shorter)
SUSPENSION AND AXLE
(c) How to read adjustment chart (Example).
(1)
(2)
Example:
Camber: 0°16' (0.26°)
Caster: 1°17' (1.28°)
(3)
(4)
Example:
Camber: 0°50' (0.83°)
Caster: 1°18' (1.30°)
(5)
Rear Cam
Direction
(Shorter)
F17149
Amount to turn adjusting cams (by graduation):
Example:
Front cam: 1.4
Rear cam: 1.5
Front
Front Cam
(Shorter)
(Longer)
Rear Cam
(Longer)
(Shorter)
− FRONT WHEEL ALIGNMENT
Find the applicable wheel alignment standard value
for the particular model.
Mark the selected standard value on the adjustment
chart.
Measure the present wheel alignment value with
the vehicle in non−loaded condition.
Mark the measured present value on the adjust-
ment chart.
As shown in the example chart, read the distance
from the measured value to the standard value, and
adjust the front and/or rear adjusting cams accord-
ingly.
Direction
Direction
Front Cam
(Longer)
Rear Cam
(Shorter)
F07284