Toyota Tundra 2005 Service - Repair - Maintenance page 2561

INSTALLATION
1. INSTALL DIFFERENTIAL CARRIER ASSEMBLY
(a) Install a new gasket.
(b) Install the differential carrier assembly with the 10 washers and nuts.
NOTICE:
Be careful not to damage the installation surface.
Torque: 73 N·m (740 kgf·cm, 54 ft·lbf)
2. CONNECT REAR PROPELLER SHAFT
2WD: See page
4WD: See page
3. INSTALL REAR AXLE SHAFTS (See page SA−98)
4. FILL DIFFERENTIAL WITH HYPOID GEAR OIL (See page SA−101)
SUSPENSION AND AXLE
PR−8
PR−15
− REAR DIFFERENTIAL CARRIER (w/ LSD)
SA−147
SA164−11