Toyota Tundra 2005 Service - Repair - Maintenance page 2725

Belt Tensioner
Suction Hose
Pressure Feed Tube
STEERING - POWER STEERING VANE PUMP (1GR-FE)
REMOVAL
1. REMOVE ENGINE UNDER COVER
2. REMOVE DRIVE BELT
While releasing the belt tension by turning the belt tensioner
counterclockwise, remove the drive belt.
F19814
3. DISCONNECT SUCTION HOSE
Remove the clip and disconnect the suction hose.
F17907
4. DISCONNECT PRESSURE FEED TUBE
(a) Remove the bolt and disconnect the pressure feed tube.
(b) Remove the gasket.
F17908
5. REMOVE VANE PUMP ASSEMBLY
(a) Disconnect the oil pressure switch connector.
F17909
Author : Date :
SR-47
SR1KT-01
4373