Toyota Tundra 2005 Service - Repair - Maintenance page 3292

Hide thumbs Also See for Tundra 2005:
Table of Contents

Advertisement

BO-178
Clip
Claws
BODY
-
FRONT SEAT (Split Type: Driver's Side)
DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
Tape the screwdriver tip before using it to remove the parts.
1.
REMOVE HEADREST
2.
REMOVE SEAT CUSHION OUTER SHIELD
(a)
Remove the screw from the seat cushion outer shield.
(b)
Using a screwdriver, remove the seat cushion outer
shield.
HINT:
Tape the screwdriver tip before use.
3.
REMOVE RECLINING ADJUSTER RELEASE HANDLE
H24331
4.
REMOVE VERTICAL ADJUSTER HANDLE
(a)
Using a screwdriver, remove the vertical adjuster handle
cap.
HINT:
Tape the screwdriver tip before use.
H24332
(b)
Remove the 2 screws and the vertical adjuster handle.
H24333
Author :
Date :
BO4SU-01
4949

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tundra 2006

Table of Contents