Toyota Tundra 2005 Service - Repair - Maintenance page 3282

BO-168
BODY - FRONT SEAT (Bench Type)
(c) Remove the hog rings from the seatback frame.
(d) Remove the seatback frame from the seatback pad and
cover.
H24298
(e) Disconnect the clamp.
(f) Loosen the adjusting nuts.
HINT:
When loosening the nuts, hold one and loosen the other.
(g) Perform the same procedure on the other side.
(h) Remove the reclining adjusting cables.
H24308
7. REMOVE SEATBACK COVER
Remove the hog rings and seatback cover.
8. REMOVE SEAT POSITION SENSOR
(See page
H24297
9. REMOVE 2 SEAT TRACK LOWER REAR BRACKETS
(a) Remove the 2 nuts and seat track lower rear bracket.
(b) Perform the same procedure on the other side.
H24299
RS-1 18)
Author : Date :
4939