Toyota Tundra 2005 Service - Repair - Maintenance page 2762

SR-84
SST
12°
STEERING
10.
Using SST to stop the control valve shaft rotating, install a new
nut.
11.
F06754
12.
(a)
SST
(b)
F06753
(c)
13.
Punch
(a)
(b)
F06759
(c)
14.
(a)
(b)
(c)
F08342
- POWER STEERING GEAR
INSTALL SELF-LOCKING NUT
SST 09616-0001 1
Torque: 30 N·m (300 kgf·cm, 22 ft·lbf)
INSTALL DUST COVER
INSTALL RACK HOUSING CAP
Apply sealant to 2 or 3 threads of the rack housing cap.
Sealant:
Part No.08833-00080, THREE BOND 1344,
LOCTITE 242 or equivalent
Using SST, install the rack housing cap.
SST 09816-30010
Torque: 59 N·m (600 kgf·cm, 43 ft·lbf)
Using a punch and hammer, stake the 2 parts of the cap.
INSTALL RACK GUIDE, RACK GUIDE SPRING AND
RACK GUIDE SPRING CAP
Install the rack guide and rack guide spring.
Apply sealant to 2 or 3 threads of the rack guide spring
cap.
Sealant:
Part No.08833-00080, THREE BOND 1344,
LOCTITE 242 or equivalent
Temporarily install the rack guide spring cap.
ADJUST TOTAL PRELOAD
To prevent the steering rack teeth from damaging the oil
seal lip, temporarily install the RH and LH rack ends.
Using a hexagon wrench, install the rack guide spring
cap.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
Using a hexagon wrench, return the rack guide spring cap
12°.
Author : Date :
4410