Toyota Tundra 2005 Service - Repair - Maintenance page 3256

BO-142
BODY - FRONT SEAT (Separate Type: Power Adjuster)
DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
z
Tape the screwdriver tip before using it to remove the
parts.
z
For easy removal of the lumbar support adjuster, release
the lumbar support through lumbar switch operation.
1. REMOVE HEADREST
2. REMOVE SLIDE KNOB AND RECLINING KNOB
Using a screwdriver, remove the slide knob and reclining knob.
HINT:
Tape the screwdriver tip before use.
H24311
3. REMOVE SEAT CUSHION LOWER SHIELD, SEAT
CUSHION OUTER SHIELD AND SEAT CUSHION IN-
NER SHIELD
(a) Remove the screw from the seat cushion outer shield.
(b) Perform the same procedure on the seat cushion inner
shield.
H24312
(c) Remove the 2 screws from the seat cushion outer shield.
(d) Remove the screw from the seat cushion inner shield.
H24313
Author : Date :
BO4S8-02
4913