Toyota Tundra 2005 Service - Repair - Maintenance page 3336

BO-222
BODY - REAR SEAT (RH)
REMOVAL
1. FOLDING REAR SEAT RH
(a) Lower the headrest to the lowest position. Pull the seat-
back angle adjusting lever and fold the seatback down.
(b) Unlock the seat legs by pulling up one of the lever on the
seat legs, and swing the seat up and forward.
2. REMOVE REAR SEAT RH
(a) Using a screwdriver, remove the 2 seat leg covers.
HINT:
H23455
Tape the screwdriver tip before use.
(b) Remove the 4 bolts and rear No.1 seat.
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
Author : Date :
BO4R9-04
4993