Toyota Tundra 2005 Service - Repair - Maintenance page 2567

INSTALLATION
1. INSTALL REAR SHOCK ABSORBER
(a) Install the 2 retainers and cushion to the shock absorber.
(b) Install the shock absorber, cushion and retainer with the nut.
Torque: 20 N·m (200 kgf·cm, 15 ft·lbf)
(c) Install the lower side of the shock absorber with the bolt and nut.
Torque: 87 N·m (890 kgf·cm, 64 ft·lbf)
2. INSTALL REAR WHEEL
Torque: 110 N·m (1,150 kgf·cm, 83 ft·lbf)
3. REMOVE SAFETY STANDS
SUSPENSION AND AXLE − REAR SHOCK ABSORBER
SA−153
SA0C1−05