Toyota Tundra 2005 Service - Repair - Maintenance page 3194

BO-80
C
C
4 Clips
2 Clips
BODY
(c)
B
A
HINT:
When installing wiper arms, make sure that the tips of the
blades are not beyond the ceramic edge as indicated by "C" part
in the illustration.
(d)
H09483
(e)
18.
19.
Install the 2 sun visor holders with the 2 screws.
20.
(a)
(b)
H16735
21.
(a)
(b)
H16734
22.
(a)
(b)
HINT:
When installing the front personal light, attach the clip to the
housing and push it to the bracket.
H09487
- WINDSHIELD
Adjust the installation positions of the wiper arms to the
positions shown in the illustration.
A: Approx. 25.7 mm (1.012 in.)
B: Approx. 39.7 mm (1.563 in.)
Torque the nuts.
Torque: 20 N·m ( 204 kgf·cm, 15 ft·lbf)
Install the caps.
INSTALL FRONT PART OF ROOF HEADLINING
INSTALL SUN VISOR HOLDERS
w/o Sliding roof:
INSTALL ROOF CONSOLE BOX
Connect the connector.
Install the console box with the 4 screws.
w/ Sliding roof:
INSTALL ROOF CONSOLE BOX
Connect the connector.
Install the console box with the 2 screws.
INSTALL FRONT PERSONAL LIGHT
Connect the connector, then install the front personal
light.
Install the 2 screws and the clip.
Author : Date :
4851