Toyota Tundra 2005 Service - Repair - Maintenance page 2499

SST
SST
SUSPENSION AND AXLE
REMOVAL
1. REMOVE FRONT WHEEL
2. LOOSEN 4 LOWER BALL JOINT SET BOLTS
HINT:
Do not remove the bolts.
3. DISCONNECT TIE ROD END
(a) Remove the cotter pin and nut from the tie rod end.
R13300
(b) Using SST, disconnect the tie rod end from the lower ball
joint.
SST
4. REMOVE LOWER BALL JOINT WITH LOWER BALL
JOINT DUST COVER PROTECTOR
(a) Remove the cotter pin and nut from the lower ball joint.
R13425
(b) Using SST, disconnect the lower ball joint from the lower
suspension arm.
SST
(c) Remove the 4 lower ball joint set bolts.
(d) Remove the lower ball joint dust cover protector.
(e) While lifting the upper suspension arm and steering
knuckle, remove the lower ball joint.
(f) Support the upper suspension arm and steering knuckle
securely.
R12863
− FRONT LOWER BALL JOINT
09610−20012
09628−62011
SA−85
SA0AY−07