Toyota Tundra 2005 Service - Repair - Maintenance page 2817

RS-50
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
(c) Remove the 2 screws from the seat cushion outer shield.
(d) Remove the screw form the seat cushion inner shield.
H24313
(e) Remove the 2 screws from the seat cushion lower shield.
(f) Disconnect the lumbar switch connector from the lumbar
switch, and remove the seat cushion lower shield, outer
shield and inner shield.
H24314
(g) Remove the screw and separate the seat cushion lower
shield and seat cushion outer shield.
(h) Perform the same procedure as for the other side.
8. REMOVE FRONT SEAT INNER BELT
(a) Disconnect the wire harness clamps and connectors.
(b) Remove the nut and front seat inner belt.
9. REMOVE LUMBAR SWITCH
Remove the 2 screws and lumbar switch from the seat cushion
outer shield.
H24315
10. REMOVE POWER SEAT SWITCH
Remove the 3 screws and power seat switch.
11. REMOVE ARMREST ASSEMBLY
(a) Using a screwdriver, remove the armrest cap.
(b) Remove the bolt, armrest spacer, armrest lock plate and
armrest assembly.
(c) Remove the spacer from the armrest assembly.
H24316
Author : Date :
4465