Toyota Tundra 2005 Service - Repair - Maintenance page 3228

Hide thumbs Also See for Tundra 2005:

Table of Contents

INSTRUMENT PANEL

DISCONNECT PASSENGER AIRBAG ASSEMBLY

When handling the airbag connector, take care not to dam-

age the airbag wire harness.

Using a clip remover, disengage the connector clamp.

Disconnect the connector as shown in the illustration.

REMOVE GLOVE COMPARTMENT DOOR

Remove the 2 screws and glove compartment door.

REMOVE LOWER NO. 2 FINISH PANEL

Remove the 3 screws and lower No. 2 finish panel.

Standard cab:

Access cab (w/o Large type console box):

Double cab (Split type seat):

REMOVE LOWER CENTER COVER

Remove the 2 clips and lower center cover.

Disconnect the connectors.

Access cab (w/ Large type console box):

REMOVE FRONT CONSOLE BOX ASSEMBLY

Remove the shifting hole cover.

Using a screwdriver, disengage the 3 clips and remove

the console panel upper.

Remove the 4 bolts and console rear end panel No. 2.