Toyota Tundra 2005 Service - Repair - Maintenance page 2758

SR-80
SST
SST
SST
Bushing
SST
Press
Oil Seal
STEERING
Bearing
F08337
Bearing
F08338
Oil Seal
F01798
SST
SST
F01799
R10955
- POWER STEERING GEAR
(c) Coat a new bearing with molybdenum disulfide lithium
base grease.
(d) Using SST, press in the bearing.
SST 09950-60010 (09951-00310),
09950-70010 (09951-07150)
(e) Coat a new bearing with molybdenum disulfide lithium
base grease.
(f) Using SST, press in the bearing.
SST 09950-60010 (09951-00320),
09950-70010 (09951-07150)
3. IF NECESSARY, REPLACE OIL SEAL
(a) Using SST, remove the oil seal from the bushing.
SST 09527-2001 1, 09612-24014 (09613-22011)
NOTICE:
Be careful not to damage the bushing.
(b) Coat a new oil seal lip with power steering fluid.
(c) Using SST, press in the oil seal.
SST 09950-60010 (09951-00300, 09951-00460,
09952-06010)
NOTICE:
Make sure to install the oil seal in the correct direction.
4. IF NECESSARY, REPLACE TEFLON RING AND O-
RING
(a) Using a screwdriver, remove the teflon ring and O-ring
from the steering rack.
NOTICE:
Be careful not to damage the groove for the teflon ring.
(b) Coat a new O-ring with power steering fluid and install it
to steering rack.
Author : Date :
4406