Toyota Tundra 2005 Service - Repair - Maintenance page 3312

BO-198
BODY - FRONT SEAT (Split Type: Passenger's Side)
13. INSTALL RH SEAT CUSHION INNER SHIELD AND
SEAT CUSHION COVER
Install the RH seat cushion inner shield and seat cushion cover
with the 2 screws.
14. INSTALL RH CENTER SEAT HINGE COVER
Install the RH center seat hinge cover with the 2 screws.
15. INSTALL FRONT SEAT CENTER BELT
(a) Install the front seat center belt with the bolt and nut.
Torque:
Bolt: 8.5 N·m (87 kgf·cm, 75 in.·lbf)
Nut: 42 N·m (430 kgf·cm, 32 ft·lbf)
HINT:
Check that the seatback frame claws are securely engaged.
16. INSTALL SHOULDER BELT COVER
H24363
17. INSTALL SEATBACK COVER
Install the seatback cover to the seatback pad with the hog
rings.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
18. INSTALL SEATBACK FRAME
(a) Install the seatback frame to the seatback pad.
(b) Install the seatback lock upper bezel.
H24361
(c) Install the 4 headrest supports to the seatback assembly.
19. INSTALL SEATBACK ASSEMBLY
(a) Install the bushing to the seatback frame.
(b) Using a torx® socket wrench, install the seatback assem-
bly with the 2 torx® screws to the seat cushion assembly.
Torque: 42 N·m (430 kgf·cm, 32 ft·lbf)
Author : Date :
4969