Toyota Tundra 2005 Service - Repair - Maintenance page 2625

SST
BRAKE − REAR DRUM BRAKE
5. REMOVE FRONT SHOE
(a) Using SST, remove the shoe hold−down spring, 2 cups
and pin.
SST
(b) Disconnect the parking brake cable No. 1 from the park-
ing brake bellcrank.
(c) Remove the front shoe with adjuster.
(d) Disconnect the parking brake cable No. 1 from the front
shoe.
R13558
6. REMOVE ADJUSTER FROM FRONT SHOE
(a) Remove the adjusting lever spring.
(b) Remove the adjuster.
7. REMOVE AUTOMATIC ADJUSTING LEVER AND
PARKING BRAKE LEVER
(a) Remove the E−ring.
(b) Remove the automatic adjusting lever.
(c) Remove the C−washer.
(d) Remove the parking brake lever.
Z03633
8. REMOVE AND DISASSEMBLE PARKING BRAKE
BELLCRANK
(a) Remove the clip and pin and disconnect the parking
brake cable.
(b) Remove the 2 tension springs.
(c) Remove the 2 bolts and bellcrank.
Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)
W02713
(d) Turn over the bellcrank boot and remove the C−washer
and pin.
(e) Remove the bellcrank bracket and bellcrank boot from the
parking brake bellcrank.
F08895
09718−00010
BR−49