Toyota Tundra 2005 Service - Repair - Maintenance page 3298

BO-184
Claw
Clip
BODY
(d)
(e)
H24861
(f)
H24337
9.
(a)
(b)
(c)
(d)
(e)
Wire Harness
H24806
10.
(a)
(b)
11.
H24333
- FRONT SEAT (Split Type: Driver's Side)
w/ Side airbag:
Connect the seatback cover bracket to the seat frame as-
sembly with the nut.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
Close the fastener.
Install the hog rings to the seat frame assembly.
INSTALL SEAT CUSHION INNER SHIELD
Connect the front seat inner belt connectors and clamps.
Install the seat cushion inner shield.
Connect the front seat inner belt wire harness clamp to
the seat cushion inner shield.
Install the screw to the seat cushion inner shield.
Install the front seat inner belt with the bolt.
Torque: 42 N·m (430 kgf·cm, 32 ft·lbf)
INSTALL VERTICAL ADJUSTER HANDLE
Install the vertical adjuster handle with the 2 screws.
Install the vertical adjuster handle cap.
INSTALL RECLINING ADJUSTER RELEASE HANDLE
Author : Date :
4955