Toyota Tundra 2005 Service - Repair - Maintenance page 3310

BO-196
Marking
BODY - FRONT SEAT (Split Type: Passenger's Side)
4. INSTALL FRONT SEAT INNER BELT
(a) Install the front seat inner belt to the seat cushion frame
with the bolt.
Torque: 42 N·m (430 kgf·cm, 32 ft·lbf)
(b) Connect the wire harness clamps.
5. INSTALL BELT WARNING OCCUPANT DETECTION
SENSOR
Peel the coated paper off the back of the new sensor. Attach the
sensor along with the marking on the pad surface as shown in
the illustration.
H24310
6. INSTALL SEAT CUSHION COVER
Install the seat cushion cover to the seat cushion pad with the
hog rings.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
H24368
7. INSTALL SEAT CUSHION FRAME
(a) Install the seat cushion frame to the seat cushion pad.
(b) Install the hog rings.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
H24367
Author : Date :
4967