Toyota Tundra 2005 Service - Repair - Maintenance page 3226

BO-1 12
Standard Cab
Access Cab
LH: 4 Clips
RH: 3 Clips
Double Cab
Clip
BODY - INSTRUMENT PANEL
6. REMOVE ASSIST GRIPS
(a) Using a screwdriver, remove the plugs.
HINT:
Tape the screwdriver tip before use.
(b) Driver side:
Using a torx® driver, remove the 2 torx® screws and assist
grip.
Torx® driver:
T30 (Part No.09041-00030 or locally manufactured
H09484
tool)
(c) Standard cab (Passenger side):
Access cab (Passenger side):
Using a torx® driver, remove the 4 torx® screws and 2 as-
sist grips.
Torx® driver: T30 (Part No.09041-00030 or locally
manufactured tool)
(d) Double cab (Passenger side):
Using a torx® driver, remove the 2 torx® screws and assist
grips.
Torx® driver:
T30 (Part No.09041-00030 or locally manufactured
tool)
7. REMOVE FRONT PILLAR GARNISH
(a) Using a screwdriver, remove the front pillar garnish.
HINT:
Tape the screwdriver tip before use.
(b) Use the same procedures described above on the other
side.
8. REMOVE STEERING WHEEL PAD
(See page
9. REMOVE STEERING WHEEL
(See page
10. REMOVE STEERING COLUMN COVERS
(See page
11. REMOVE COMBINATION SWITCH
Disconnect the 4 connectors and remove the 3 screws and
combination switch.
H24930
SR-18 , SR-33 )
SR-18 , SR-33 )
SR-18 , SR-33 )
Author : Date :
4883