Toyota Tundra 2005 Service - Repair - Maintenance page 3287

BODY - FRONT SEAT (Bench Type)
7. INSTALL RH OUTER TRACK ASSEMBLY
HINT:
Perform the same procedure on the other side.
8. INSTALL 2 SEAT TRACK LOWER REAR BRACKETS
(a) Install the seat track lower rear bracket with the 2 nuts.
Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)
(b) Perform the same procedure on the other side.
9. INSTALL SEAT POSITION SENSOR
(See page
H24299
10. INSTALL SEATBACK COVER
Install the seatback cover with the hog rings.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
H24297
11. INSTALL SEATBACK FRAME
(a) Temporarily install the reclining adjusting cables.
(b) Tighten the adjusting nuts.
HINT:
When tightening the nuts, hold one and tighten the other.
(c) Perform the same procedure on the other side.
(d) Connect the clamp.
(e) Install the seatback frame to the seatback pad and cover.
H24308
RS-122 )
Author : Date :
BO-173
4944