PR−20
PROPELLER SHAFT
−
2WD and 4WD front propeller shaft:
Color
Blue
Yellow
Silver
Copper
Black
Red
R16053
Green
(b)
Using a hammer, tap the yoke until there is no clearance
between the bearing outer race and snap ring.
6.
CHECK SPIDER BEARING
(a)
Check that the spider bearing moves smoothly.
(b)
Check the spider bearing axial play.
Maximum bearing axial play:
4WD rear propeller shaft: 0 mm (0 in.)
2WD and 4WD front propeller shaft:
0.05 mm (0.0020 in.)
HINT:
S
Install new spider bearings on the flange side using the
R04428
procedure described above.
SPIDER BEARING
Thickness mm (in.)
1.638 (0.0645)
1.588 (0.0625)
1.537 (0.0605)
1.511 (0.0595)
1.486 (0.0585)
1.435 (0.0565)
1.384 (0.0545)