Toyota Tundra 2005 Service - Repair - Maintenance page 2794

SUPPLEMENTAL RESTRAINT SYSTEM
Battery
SST
10 m (33 ft) or more
- STEERING WHEEL PAD AND SPIRAL CABLE
(2) Connect the SST connector to the airbag connector
of the spiral cable.
SST 09082-00700, 09082-00780
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
(3) Move the SST at least 10 m (33 ft) away from the ve-
hicle front side window.
(4) Maintaining enough clearance for the SST wire har-
ness in the front side window, close all doors and
windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(5) Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip of the SST to the
R13455
negative (-) terminal.
(f) Deploy the airbag.
(1) Check that no one is inside the vehicle or within a
10 m (33 ft) radius of the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
CAUTION:
z
When deploying the airbag, make sure that no one is
near the vehicle.
z
The steering wheel pad becomes extremely hot when
the airbag is deployed, so do not touch it for at least
30 minutes after deployment.
z
Use gloves and safety glasses when handling a steer-
ing wheel pad with a deployed airbag.
z
Do not apply water, etc. to a steering wheel pad with
a deployed airbag.
z
Always wash your hands with water after completing
the operation.
2. DEPLOYMENT WHEN DISPOSING OF STEERING
WHEEL PAD ONLY
NOTICE:
z
When disposing of the steering wheel pad, never use
the customer's vehicle to deploy the airbag.
z
Be sure to follow the procedure given below when de-
ploying the airbag.
HINT:
Prepare a battery as the power source to deploy the airbag.
Author : Date :
RS-27
4442