Toyota Tundra 2005 Service - Repair - Maintenance page 3281

BODY - FRONT SEAT (Bench Type)
DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
Tape the screwdriver tip before using it to remove the parts.
1. REMOVE HEADRESTS
2. REMOVE SEAT HINGE COVER LH
Remove the 2 screws and seat hinge cover LH.
3. REMOVE SEAT HINGE COVER RH
Remove the 2 screws and seat hinge cover RH.
4. REMOVE SEATBACK ASSEMBLY
Remove the 4 bolts and seatback assembly.
H24294
5. REMOVE CENTER ARMREST ASSEMBLY
(a) Remove the hog rings and turn the seatback cover over.
H24295
(b) Remove the 2 nuts and center armrest assembly from the
seatback frame.
6. REMOVE SEATBACK FRAME
(a) Remove the 6 headrest supports from the seatback as-
sembly.
(b) Remove the 2 screws and shoulder belt guide.
H24296
Author : Date :
BO-167
BO4SS-03
4938