Toyota Tundra 2005 Service - Repair - Maintenance page 2504

Hide thumbs Also See for Tundra 2005:

Table of Contents

SUSPENSION AND AXLE

INSPECT STABILIZER BAR LINK BALL JOINT BOOT

INSPECT STABILIZER BAR LINK BALL JOINT FOR

ROTATION CONDITION

As shown in the illustration, flip the ball joint stud back and

forth 5 times before installing the nut.

Using a torque wrench, turn the nut continuously 1 turn

per 2 − 4 seconds and take the torque reading on the 5th

Turning torque:

0.05 − 2.0 N·m (0.5 − 20 kgf·cm, 0.4 − 17 in.·lbf)

FRONT STABILIZER BAR