Toyota Tundra 2005 Service - Repair - Maintenance page 2757

SST
Oil
Seal
Bearing
SST
Bearing
SST
SST
Bearing
SST
Bearing
SST
Bearing
STEERING - POWER STEERING GEAR
REPLACEMENT
NOTICE:
When using a vise, do not overtighten it.
1. IF NECESSARY, REPLACE OIL SEAL AND BEARING
(a) Using SST, press out the oil seal and bearing from the
control valve housing.
SST 09950-60010 (09951-00250),
09950-70010 (09951-07150)
F08332
(b) Coat a new oil seal lip with power steering fluid.
(c) Using SST, press in the oil seal.
SST 09950-60010 (09951-00180, 09951-00320,
09952-06010), 09950-70010 (09951-07150)
NOTICE:
Make sure to install the oil seal in the correct direction.
F08333
(d) Coat a new bearing with molybdenum disulfide lithium
base grease.
(e) Using SST, press in the bearing.
SST 09950-60010 (09951-00340),
09950-70010 (09951-07150)
F08335
2. IF NECESSARY, REPLACE 2 BEARINGS
(a) Using SST, press out the bearing.
SST 09950-60010 (09951-00260),
09950-70010 (09951-07150)
F08334
(b) Using SST, press out the bearing from the rack housing.
SST 09950-60010 (09951-00260),
09950-70010 (09951-07200)
F08336
Author : Date :
SR-79
SR0VB-05
4405