Toyota Tundra 2005 Service - Repair - Maintenance page 2600

BR−24
INSTALLATION
Installation is in the reverse order of removal (See page BR−20).
HINT:
S
Before installation, adjust length of the brake booster push rod (see page BR−34).
S
After installation, fill the brake reservoir with brake fluid and bleed the brake system
(see page BR−4).
S
Check for leaks, check and adjust the brake pedal (see page BR−10).
S
Check brake pedal height (see page BR−10).
S
Check the brake actuator with the hand−held tester (see page BR−62).
BRAKE − BRAKE MASTER CYLINDER (Standard Cab, Access
Cab)
BR1Y1−01