SR-54
Bushing
Vinyl Tape
O-Ring
Side Plate
STEERING
-
POWER STEERING VANE PUMP (1GR-FE)
REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1.
COAT PARTS INDICATED BY ARROWS WITH POWER
STEERING FLUID (See page
2.
INSTALL VANE PUMP SHAFT WITH VANE PUMP
PULLEY
(a)
Coat the inside surface of the bushing in the front housing
with power steering fluid.
(b)
Gradually insert the vane pump shaft.
NOTICE:
Do not damage the oil seal lip in the front housing.
F19808
HINT:
Wrap the shaft surface with vinyl tape before inserting.
F17912
3.
INSTALL SIDE PLATE
(a)
Coat a new O-ring with power steering fluid, and install
it to the front housing.
F19952
(b)
Coat a new O-ring with power steering fluid, and install
it to the side plate.
F19951
SR-45
Author :
Date :
SR1KX-01
)
4380