Toyota Tundra 2005 Service - Repair - Maintenance page 3229

4 Clips
6 Clips
H16748
H16749
BODY - INSTRUMENT PANEL
(d) Remove the 2 bolts, clip and the front console box assem-
bly.
(e) Disconnect the connector.
H20710
26. Double cab:
REMOVE SHIFTING HOLE COVER
(a) Using a screwdriver, disengage the 4 clips and remove
the shifting hole cover.
HINT:
Tape the screwdriver tip before use.
27. Double cab:
REMOVE UPPER CONSOLE PANEL
(a) w/ Seat heater:
H24933
Using a screwdriver, remove the seat heater switches,
then disconnect the connectors.
HINT:
Tape the screwdriver tip before use.
(b) Using a screwdriver, remove the power mirror control
switch, then disconnect the connector.
HINT:
Tape the screwdriver tip before use.
(c) Using a screwdriver, disengage the 6 clips and remove
the upper console panel.
HINT:
Tape the screwdriver tip before use.
H23686
28. Double cab:
REMOVE REAR CONSOLE BOX
(a) w/ VTR control garnish.
Using a screwdriver, disengage the 2 claws, and remove
the VTR control garnish and connector.
(b) Disconnect the connector.
HINT:
Tape the screwdriver tip before use.
H23687
Author : Date :
BO-1 15
4886