PR−18
SST
PROPELLER SHAFT
−
4.
INSTALL SPIDER BEARING
(a)
Apply MP grease to a new spider and bearings.
HINT:
Be careful not to apply too much grease.
(b)
Align the matchmarks on the yoke and shaft.
(c)
Fit the spider to the yoke.
Z00735
(d)
Using SST, install the bearing to the spider.
SST
PR0027
(e)
Using SST, adjust both bearings so that the snap ring
grooves are at maximum and are equal in width.
PR0028
SPIDER BEARING
09332−25010