Toyota Tundra 2005 Service - Repair - Maintenance page 2791

Hide thumbs Also See for Tundra 2005:
Table of Contents

Advertisement

RS-24
SUPPLEMENTAL RESTRAINT SYSTEM
Horn Button Contact Plate
-
STEERING WHEEL PAD AND SPIRAL CABLE
INSPECTION
1.
VEHICLES NOT INVOLVED IN A COLLISION
(a)
Perform a diagnostic system check (see page
(b)
With the steering wheel pad installed on the vehicle, per-
form a visual check. If there are any defects as mentioned
below, replace the steering wheel pad with a new one:
Cuts, minute cracks or marked discoloration on the steer-
ing wheel pad top surface or in the grooved portion.
H24700
2.
VEHICLE INVOLVED IN A COLLISION AND AIRBAG IS
NOT DEPLOYED
(a)
Perform a diagnostic system check (see page
(b)
With the steering wheel pad removed from the vehicle,
perform a visual check. If there are any defects as men-
tioned below, replace the steering wheel pad or steering
wheel assembly with a new one:
z
Cuts, minute cracks or marked discoloration on the
steering wheel pad top surface or in the grooved
H20642
portion.
z
Cracks or other damage to the connectors.
z
Deformation of the steering wheel assembly.
z
Deformation of the horn button contact plate of the horn
button assembly.
H23201
z
There should be no interference between the steering
wheel pad and steering wheel assembly, and the clear-
ance should be uniform all the way around when the new
steering wheel pad is installed on the steering wheel as-
sembly.
CAUTION:
For removal and installation procedures of the steering
wheel pad, see page
the correct procedure.
H24701
RS-23
and
RS-33
Author :
Date :
RS121-01
DI-1871
).
DI-1871
).
. Be sure to follow
4439

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tundra 2006

Table of Contents