Toyota Tundra 2005 Service - Repair - Maintenance page 3354

BO-240
BODY - SEAT BELT PRETENSIONER
(1) Using a screwdriver, remove the cap.
HINT:
Tape the screwdriver tip before use.
(2) Remove the bolt and front seat outer belt shoulder
anchor.
(f) Remove the retractor of front seat outer belt.
CAUTION:
Never disassemble the front seat outer belt.
NOTICE:
H11155
When removing the retractor of front seat outer belt, take
care not to pull the seat belt pretensioner wire harness.
(1) Using a screwdriver, pull the locking button of the
pretension connector to your side to release the
lock.
HINT:
Tape the screwdriver tip before use.
(2) Disconnect the connector.
(3) Remove the 2 bolts and the front seat outer belt as-
sembly.
H18975
Author : Date :
5011