Toyota Tundra 2005 Service - Repair - Maintenance page 2822

SUPPLEMENTAL RESTRAINT SYSTEM
SST
- SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
(g) Deploy the airbag.
(1) Check that no one is inside the vehicle or within a
10 m (33 ft) radius of the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
CAUTION:
z
When deploying the airbag, make sure that no one is
near the vehicle.
z
The front seat airbag assembly becomes extremely
H17495
hot when the airbag is deployed, so do not touch it for
at least 30 minutes after deployment.
z
Use gloves and safety glasses when handling a front
seat airbag assembly with a deployed airbag.
z
Do not apply water, etc. to a front seat airbag assem-
bly with a deployed airbag.
z
Always wash your hands with water after completing
the operation.
HINT:
The airbag deploys as the LED of the SST activation switch
comes on.
2. DEPLOYMENT WHEN DISPOSING OF SIDE AIRBAG
ASSEMBLY
NOTICE:
z
When disposing of the side airbag assembly, never
use the customer's vehicle to deploy the airbag.
z
Be sure to follow the procedure given below when de-
ploying the airbag.
HINT:
Prepare a battery as the power source to deploy the airbag.
(a) Check the function of the SST (see step 1-(a)).
(b) Remove the front seat airbag assembly (see page
RS-49 (power adjuster type),
type) and
(c) Remove the seatback assembly (see page
(power adjuster type),
RS-74 (passenger side of split type)).
AB0152
RS-64
RS-74 (passenger side of split type)).
RS-64 (manual sdjuster type) and
Author :
RS-55
(manual sdjuster
RS-49
Date :
4470