Toyota Tundra 2005 Service - Repair - Maintenance page 3164

BO-50
Wiper Link
C
C
BODY
INSTALLATION
1.
2.
Install the wiper link through the service hole, then torque the
6 bolts.
3.
(a)
HINT:
When installing the wiper motor, connect the claw of wiper link
to the cowl panel shown in the illustration.
(b)
Cowl Panel
(c)
4.
H02485
Install the hood to cowl top seal to the cowl top ventilator louver.
5.
Install the cowl top ventilator louver with the 8 screws and 6
clips.
6.
(a)
(b)
(c)
B
A
HINT:
When installing the wiper arms, make sure that the tips of the
blades are not beyond the ceramic edge as indicated "C" part
in the illustration.
(d)
H09483
(e)
- FRONT WIPER AND WASHER
INSTALL WASHER NOZZLES
INSTALL WIPER LINK
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
INSTALL WIPER MOTOR
Install the wiper motor to the wiper link.
Torque the 4 bolts.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
Connect the connector.
INSTALL HOOD TO COWL TOP SEAL
INSTALL COWL TOP VENTILATOR LOUVER
INSTALL WIPER ARMS
Operate the wiper once and turn the wiper switch OFF.
Install the wiper arms and tighten the nuts by hand.
Adjust the installation positions of the wiper arms to the
positions shown in the illustration.
A: Approx. 25.4 mm (1.000 in)
B: Approx. 40.0 mm (1.574 in)
Torque the 2 nuts.
Torque: 20 N·m (205 kgf·cm, 15 ft·lbf)
Install the 2 caps.
Author :
BO2ER-02
Date :
4821