Toyota Tundra 2005 Service - Repair - Maintenance page 3308

BO-194
BODY - FRONT SEAT (Split Type: Passenger's Side)
22. REMOVE SEAT TRACK ADJUSTING HANDLE
(a) Using a screwdriver, disengage the seat track cover
spring.
HINT:
Tape the screwdriver tip before use.
(b) Perform the same procedure on the other side.
(c) Remove the seat track adjusting handle.
23. REMOVE RH AND LH SEAT TRACK HANDLE SUB-
ASSEMBLY
H24369
(a) Remove the nut and RH seat track handle sub-assembly.
(b) Perform the same procedure on the other side.
24. REMOVE RECLINING ADJUSTING CABLE
(a) Disconnect the clamp.
(b) Loosen the adjusting nuts.
HINT:
When loosening the nuts, hold one and loosen the other.
(c) Remove the reclining adjusting cable.
H24371
Author : Date :
4965