Toyota Tundra 2005 Service - Repair - Maintenance page 2819

RS-52
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
INSPECTION
1. VEHICLE NOT INVOLVED IN A COLLISION
(a) Perform a diagnostic system check (see page
(b) With the front seat airbag assy installed on the vehicle,
perform a visual check. If there are any defects as men-
tioned below, replace the front seatback assy with a new
one:
Cuts, minute cracks or marked discoloration on the front
seatback assy around the front seat airbag assy.
2. VEHICLE INVOLVED IN A COLLISION AND AIRBAG IS
NOT DEPLOYED
(a) Perform a diagnostic system check (see page
(b) Perform a visual check which includes the following items
with the seatback assembly removed from the vehicle.
z
Cuts, tears and cracks on the side airbag assembly.
z
Cuts and cracks in the wire harness, and chipping
in the connectors.
CAUTION:
For removal and installation of the front seatback assem-
bly, see page
rect procedure.
H23933
RS-49 and RS-60 . Be sure to follow the cor-
Author :
RS128-01
DI-1871
DI-1871
Date :
4467
).
).