SUSPENSION AND AXLE
SST
Z00638
SST
R13357
SST
SST
R13358
SST
R13359
−
REAR DIFFERENTIAL FRONT OIL SEAL
REPLACEMENT
1.
DRAIN DIFFERENTIAL OIL
2.
DISCONNECT REAR PROPELLER SHAFT
2WD: See page
4WD: See page
3.
REMOVE COMPANION FLANGE
(a)
Using a chisel and hammer, loosen the staked part of the
nut.
(b)
Using SST to hold the flange, remove the nut.
SST
09330−00021
(c)
Using SST, remove the companion flange.
SST
09950−30012 (09951−03010, 09953−03010,
09954−03010, 09955−03030, 09956−03050)
4.
REMOVE OIL SEAL
Using SST, remove the oil seal.
SST
09308−10010
5.
REMOVE FRONT BEARING
Using SST, remove the front bearing from the drive pinion.
SST
09556−22010
6.
REMOVE BEARING SPACER
(a)
Remove the 2 washers.
(b)
Remove the bearing spacer.
7.
INSTALL NEW BEARING SPACER
(a)
Install a new bearing spacer.
(b)
Install the 2 washers.
PR−3
PR−10
SA−101
SA1KD−05