Toyota Tundra 2005 Service - Repair - Maintenance page 3241

2 Clips
BODY - ROOF HEADLINING
(b) Using a screwdriver, remove the cap.
(c) Remove the bolt and front seat outer belt shoulder an-
chor.
Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)
(d) Perform the same procedure on the other side.
8. Access cab:
REMOVE ROOF SIDE RAIL GARNISH
(a) Using a screwdriver, remove the caps.
(b) Using a torx® driver (T30), remove the 2 screws and assist
H11394
grip.
(c) Using a screwdriver, remove the roof side rail garnish.
9. REMOVE SUN VISORS
(a) Remove the 4 screws and 2 sun visors.
(b) w/ Light:
Disconnect the connector.
10. REMOVE SUB-VISORS
Remove the 4 screws and 2 sub-visors.
H11159
11. REMOVE FRONT PERSONAL LIGHT
(a) Using a screwdriver, remove the left side lens.
H09486
(b) Remove the 2 screws.
(c) Using a screwdriver, rotate the clip by 90° and remove it.
(d) Remove the front personal light, then disconnect the con-
nector.
HINT:
At the time of installation, please refer to the following item.
When installing the front personal light, attach the clip to the
housing and push it to the bracket.
H09487
Author : Date :
BO-127
4898