Toyota Tundra 2005 Service - Repair - Maintenance page 3149

BODY - REAR DOOR (Double Cab)
ADJUSTMENT
1. ADJUST DOOR IN FORWARD/ REARWARD AND VER-
TICAL DIRECTIONS
(a) Remove the front and rear door scuff plates.
(b) Remove the center pillar lower garnish.
(c) Remove the front seat outer belt (see page
(d) Loosen the body side hinge nuts to adjust.
Torque: 23 N·m (230 kgf·cm, 17 ft·lbf)
(e) Install the front seat outer belt and center pillar lower gar-
H23264
nish (see page
(f) Install the front and rear door scuff plates.
2. ADJUST DOOR IN LEFT/RIGHT AND VERTICAL
DIRECTIONS
Loosen the door side hinge bolts to adjust.
Torque: 23 N·m (230 kgf·cm, 17 ft·lbf)
H23265
3. ADJUST DOOR LOCK STRIKER
(a) Check that the door fit and door lock linkages are adjusted
correctly.
(b) Loosen the striker mounting screws to adjust.
Torque: 23 N·m (230 kgf·cm, 17 ft·lbf)
(c) Using a plastic hammer, tap the striker to adjust it.
H23539
BO-133 ).
Author : Date :
BO-35
BO4PW-01
BO-133 ).
4806